Rubber Linings (Curing times listed are guidelines only)
- All
- Mining
- Chemical
- Oil Sands
Permobond® RS-5610 Black Bromobutyl Rubber Protective Rubber Lining allows
the same workability as other butyl linings but exhibits stronger physical characteristics than the other
butyl counterparts. The RS-5610 comes with a proprietary bonding layer for added adhesion. The
RubberSource bonding layer also will give the same service condition resistance as the face stock. The
5610 can handle constant temperatures of 260°F (127°F) with temperature spikes to 310 °F (154°C).
| Typical Uses |
| Storage Vessels |
| Rail Cars |
| Tanker Trucks |
| Piping |
- Hardness:
55 – 65 Shore A Durometer
- Tensile:
2200 psi min.
- Elongation:
450% min.
- Tear:
165 Lb/Lin. In.
- Service Temperature:
260°F max (127°C)
| Strengths |
| Abrasion |
| Oxidation |
| Ozone |
| Variety of chemicals |
| High temperatures |
RS-B55 Pre Cured Black Bromobutyl made from bromobutyl polymer. It combines the
properties of good heat resistance, and very good resistance to corrosive acids and alkalies, while still
retaining a moderate abrasion resistance. It has excellent resistance to ozone and outdoor weathering
effects, and suitable for use with a range of chemicals including oxygenated solvents and hydraulic
fluid. Suitable for most applications where high acid, chemical or temperature resistance is required. A
rubber polymer blend with up to 70% bromobutyl and abrasion resistant rubber makes it suitable for
many applications. Also shows low permeability to compressed gases. Available with a bonding layer.
| Typical Uses |
| Equipment |
| Vessels |
- Hardness:
50 – 60 Shore A Durometer
- Tensile:
1280 psi min.
- Elongation:
350% min.
- Tear:
165 Lb/Lin. In (
- Service Temperature:
260°F max. (127°C)
| Strengths |
| Abrasion |
| Chemical resistance |
| High temperatures |
RS-B60 Pre Cured Black Bromobutyl made from bromobutyl polymer. It combines the
properties of good heat resistance, and very good resistance to corrosive acids and alkalies, while still
retaining a moderate abrasion resistance. It has excellent resistance to ozone and outdoor weathering
effects, and suitable for use with a range of chemicals including oxygenated solvents and hydraulic
fluid. Suitable for most applications where high acid, chemical or temperature resistance is required. A
rubber polymer blend with up to 65% bromobutyl and abrasion resistant rubber makes it suitable for
many applications. Also shows low permeability to compressed gases. Available with a bonding layer.
| Typical Uses |
| Equipment |
| Vessels |
- Hardness:
60 - 70 Shore A Durometer
- Tensile:
1280 psi min.(90kg/cm²)
- Elongation:
350% min.
- Tear:
140 Lb/Lin. In
- Service Temperature:
260°F max.(127°C)
| Strengths |
| Abrasion |
| Chemical resistance |
| High temperatures |
RS-B4CN Pre Cured Black Bromobutyl made from bromobutyl polymer. It combines
the properties of good heat resistance, diffusion resistance to gases such as nitrogen oxides, sulfur
dioxide, and saturated water vapors. It also has very good resistance to corrosive acids , mineral,
bases, aqueous phases, polar solvents and alkalies, while still retaining a moderate abrasion resistance.
It has excellent resistance to ozone and outdoor weathering effects, and suitable for use with a range
of chemicals including oxygenated solvents and hydraulic fluid. Suitable for most applications where
high acid, chemical or temperature resistance is required. Available with a bonding layer.
| Typical Uses |
| Storage Vessels |
| Rail Cars |
| Tanker Trucks |
| Piping |
- Hardness:
50 – 60 Shore A Durometer
- Tensile:
570 psi min. (40 kg/cm²)
- Elongation:
370% min.
- Tear:
85 Lb/Lin. In. (15kg/cm)
- Service Temperature:
260°F max (127°C)
| Strengths |
| Abrasion |
| Acids |
| Salt Solution |
Permobond® RS-5510 Black Chlorobutyl Rubber Protective Rubber Lining allows
the same workability as other butyl linings but exhibits stronger physical properties such as chemical
and abrasion resistance. This compound has a high level of heat and heat aging resistance to 225°F.
(107°C).
| Typical Uses |
| Storage Vessels |
| Rail Cars |
| Tanker Trucks |
| Piping |
- Hardness:
50 – 60 Shore A Durometer
- Tensile:
1300 psi min.
- Elongation:
400% min.
- Tear:
150 Lb/Lin. In.
- Service Temperature:
225°F (107°C) max.
| Strengths |
| Abrasion |
| Oxidation |
| Ozone |
| Variety of chemicals |
| High temperatures |
Permobond® RS-5985 White Soft Chlorobutyl Rubber is a Chlorobutyl lining for
general chemical resistance. FDA compliant as per 21CFR177.2600.
| Typical Uses |
| Storage Vessels |
| Rail Cars |
- Hardness:
35 – 45 Shore A Durometer
- Tensile:
1000 psi min.
- Elongation:
400% min.
- Tear:
165 Lb/Lin. In.
- Service Temperature:
200°F max (93°C)
| Strengths |
| Oxidation |
| Ozone |
| Variety of chemicals |
Permobond® RS-5980 Black Pure Chlorobutyl Rubber is a “pure” black
Chlorobutyl lining with excellent chemical & heat resistance up to 225°F (107°C). Comes with a NR Tiegum
layer for added adhesion.
| Typical Uses |
| Storage Vessels |
| Rail Cars |
| Tanker Trucks |
- Hardness:
45 – 55 Shore A Durometer
- Tensile:
1300 psi min.
- Elongation:
550% min.
- Tear:
165 Lb/Lin. In.
- Service Temperature:
225°F (107°C) max.
| Strengths |
| Oxidation |
| Ozone |
| Variety of chemicals |
EPDM is a pre cured Black EPDM (Ethylene Propylene Diene
Monomer) Protective Rubber Lining. Commonly used in outdoor applications due to it’s excellent
ozone and UV resistance. Rubber sheeting available Smooth/Smooth, Fabric Finish, or with Bonding
Layer.
| Typical Uses |
| Roofing |
| Railway Crossings |
| Automotive |
- Hardness:
55 - 65 Shore A Durometer
- Tensile:
725 psi min. (60 kg/cm²)
- Elongation:
500% min.
- Tear:
165 Lb/Lin. In.
- Service Temperature:
221°F max. (105°C)
| Strengths |
| Abrasion resistance |
| Acid |
Hypalon is very resistant to attack by
oxygen and ozone, and properly compounded products show excellent weathering resistance. RS-651
is highly popular in outdoor applications where it thrives in the harshest weather conditions.
| Typical Uses |
| Opened Top Vessels |
| Outdoor Equipment |
| Infrastructure |
- Hardness:
55 - 65 Shore A Durometer
- Tensile:
2276 psi min. (160 kg/cm²)
- Elongation:
400% min.
- Tear:
400 Lb/Lin. In.
- Service Temperature:
284°F max. (140°C)
| Strengths |
| Abrasion resistance |
| Acid Resistance |
| Salt |
Permobond® RS-0013 / Tan Natural Rubber has excellent physical properties, like tensile strength, abrasion resistance, and elongation.
As well has good resistance to most inorganic chemicals, with the exception of strong oxidizing agents. RS-0013 is flexible and will expand and contract with thermal
variations of the metal substrate.
| Typical Uses |
| Tanks |
| Piping |
| Various Mining Equipment |
- Hardness:
35 - 45 Shore A Durometer
- Tensile:
4000 psi min.
- Elongation:
650% min.
- Tear:
200 Lb/Lin. In.
- Service Temperature:
180°F max.
| Strengths |
| Abrasion |
| Acids |
| Various equipment |
Permobond® RS-4001 Black Natural Rubber has excellent physical properties, like
tensile strength, abrasion resistance, and elongation. As well has good resistance to most inorganic
chemicals, with the exception of strong oxidizing agents. Resistance to weather (ozone) and water. RS-
5506 is flexible and will expand and contract with thermal variations of the metal substrate. Often used
in applications such as Phosphoric Acid for it’s low permeation physical properties.
| Typical Uses |
| Tanks |
| Piping |
| Chutes |
| Various Equipment |
- Hardness:
55 - 65 Shore A Durometer
- Tensile:
3800 psi min.
- Elongation:
650% min.
- Tear:
260 Lb/Lin. In.
- Service Temperature:
212°F max.(100°C)
RS-400 Pre Cured Red Natural Rubber High abrasion resistant, engineered for
the mining industry. RubberSource Premium cold bonding quality rubber, a soft rubber compound
mainly for High wet abrasion resistance applications, specifically engineered for the mining industry. It
outlasted the best of market available materials in the mining industry around the world. RubberSource
natural rubber has excellent physical properties such as; elongation, resilience, tensile strength,
abrasion and a wide range of chemical resistance. RS-400 rubber comes with buff back, cloth profile or
bonding layer for easy application.
| Typical Uses |
| Mining equipment |
| Chemical |
- Hardness:
33 - 43 Shore A Durometer
- Tensile:
3415 psi min.(240kg/cm²)
- Elongation:
810% min.
- Tear:
224 Lb/Lin. In. (40kg/cm)
- Service Temperature:
158°F max. (70°C)
| Strengths |
| Abrasion resistance |
| High resilience |
| Reduces corrosion |
| Vibration & noise absorbing |
RS600 - High abrasion resistant, engineered for the
mining industry. RubberSource Premium cold bonding quality rubber, a soft rubber compound mainly
for dry abrasion resistance applications, specifically engineered for the mining industry. It outlasted
the best of market available materials in the mining industry around the world. RubberSource natural
rubber has excellent physical properties such as; elongation, resilience, tensile strength, abrasion and
a wide range of chemical resistance. RS-600 rubber comes with buff back, cloth profile or bonding
layer for easy application.
| Typical Uses |
| Mining equipment |
- Hardness:
55 - 65 Shore A Durometer
- Tensile:
2845 psi min. (200kg/m²)
- Elongation:
500% min.
- Tear:
252 Lb/Lin. In. (50 kg/cm)
- Service Temperature:
158°F max. (70°C)
| Strengths |
| Abrasion resistance |
Permobond® RS-3801 / Red Natural Rubber has excellent physical properties, like tensile strength, abrasion resistance, and elongation.
As well has good resistance to most inorganic chemicals, with the exception of strong oxidizing agents. RS-3801 is flexible and will expand and contract with thermal
variations of the metal substrate.
| Typical Uses |
| Piping |
| Mining Equipment |
- Hardness:
35 - 40 Shore A Durometer
- Tensile:
4000 psi min.
- Elongation:
700% min.
- Tear:
200 Lb/Lin. In.
- Service Temperature:
180°F max.
| Strengths |
| Abrasion resistance |
Permobond 5144 (Black Natural) has excellent physical properties, like tensile strength, abrasion resistance, and elongation.
As well has good resistance to most inorganic chemicals, along with resistance to weather and water.
5144 is flexible and will expand and contract with thermal variations of the metal substrate.
| Typical Uses |
| Piping |
| Chutes |
| Vessels |
| Thickeners |
- Hardness:
40 - 50 Shore A Durometer
- Tensile:
3000 psi min.
- Elongation:
450% min.
- Tear:
250 Lb/Lin. In.
- Service Temperature:
180°F max.
| Strengths |
| Abrasion |
| Ozone |
| Variety of chemicals |
Permobond® RS-5506 Black Natural Rubber has excellent physical properties, like
tensile strength, abrasion resistance, and elongation. As well has good resistance to most inorganic
chemicals, with the exception of strong oxidizing agents. Resistance to weather (ozone) and water. RS-
5506 is flexible and will expand and contract with thermal variations of the metal substrate. Often used
in applications such as Phosphoric Acid for it’s low permeation physical properties.
| Typical Uses |
| Piping |
| Chutes |
| Tanks |
| Various Equipment |
- Hardness:
55 - 65 Shore A Durometer
- Tensile:
3800 psi min.
- Elongation:
650% min.
- Tear:
260 Lb/Lin. In.
- Service Temperature:
212°F max.(100°C)
Uniroyal Permobond® 0016 has excellent physical properties, like
tensile strength, abrasion resistance, and elongation. As well has good resistance to most inorganic
chemicals, with the exception of strong oxidizing agents. RS-0016 is flexible and will expand and contract
with thermal variations of the metal substrate.
| Typical Uses |
| Tanks |
| Piping |
| Various Mining Equipment |
- Hardness:
35 - 45 Shore A Durometer
- Tensile:
2600 psi min.
- Elongation:
650% min.
- Tear:
164 Lb/Lin. In.
- Service Temperature:
180°F max.(82.22°C)
| Strengths |
| Abrasion |
| Acids |
| Salt |
| Various equipment |
Permobond® RS-3801 / Black Natural Rubber has excellent physical properties, like
tensile strength, abrasion resistance, and elongation. As well has good resistance to most inorganic
chemicals, with the exception of strong oxidizing agents. RS-3802 is flexible and will expand and contract
with thermal variations of the metal substrate.
| Typical Uses |
| Piping |
| Mining Equipment |
| Tanks |
- Hardness:
35 - 45 Shore A Durometer
- Tensile:
4000 psi min.
- Elongation:
700% min.
- Tear:
200 Lb/Lin. In.
- Service Temperature:
180°F max.(82.22°C)
| Strengths |
| Abrasion resistance |
RS-E400 Pre Cured Black Natural Rubber is an economical alternative to RS-400
and is made from a natural rubber polymer. It combines the properties of good heat resistance, and
very good resistance to corrosive acids and alkalies, whilst still retaining abrasion resistance. A natural
polymer and abrasion resistant rubber makes it suitable for many applications. Supplied with a special
CN Bonding layer which does not require buffing prior to bonding.
| Typical Uses |
| Mining equipment |
| Chemical |
- Hardness:
35 - 45 Shore A Durometer
- Tensile:
2175 psi min.(153kg/cm²)
- Elongation:
6000% min.
- Tear:
224 Lb/Lin. In. (40kg/cm)
- Service Temperature:
194°F max. (90°C)
| Strengths |
| Abrasion resistance |
| High resilience |
| Reduces corrosion |
| Vibration & noise absorbing |
RS-E600 Pre Cured Black Natural Rubber is an economical alternative to RS-600 and
is made from a natural rubber polymer. It combines the properties of good heat resistance, and very
good resistance to corrosive acids and alkalies, while still retaining abrasion resistance. It has excellent
resistance to ozone and outdoor weathering effects, and suitable for use with a range of chemicals
including oxygenated solvents and hydraulic fluid. Also shows low permeability to compressed gases.
Supplied with a special CN Bonding layer which does not require buffing prior to bonding. Also
available in Red.
| Typical Uses |
| Mining equipment |
| Chemical |
- Hardness:
60 - 75 Shore A Durometer
- Tensile:
1635 psi min. (200kg/m²)
- Elongation:
450% min.
- Tear:
252 Lb/Lin. In. (50 kg/cm)
- Service Temperature:
194°F max. (90°C)
| Strengths |
| Abrasion resistance |
Permobond® RS-0545 Black Lead Cure Neoprene® (CR) Rubber The lead
content imparts better flame resistance, weather ability and ozone resistance than a typical CR rubber
formulation. The permeation resistance of the mineral, vegetable, and animal oils is also better than
all other CR linings. RS-0545 has good resistance to paraffinic and naphthenic oils of higher molecular
weight but swell extensively in aromatic oils of low molecular weight. With the lead curing package and
the addition of higher levels of filler loading we have improved the crosslink giving it exceptional resistance
to oils, abrasion, and swelling in aqueous solutions and slurries.
| Typical Uses |
| Piping |
| Vessels |
| Various Equipment |
- Hardness:
53 – 63 Shore A Durometer
- Tensile:
2500 psi min.
- Elongation:
550% min.
- Tear:
229 Lb/Lin. In.
- Service Temperature:
220°F max.(104.44°C)
| Strengths |
| Abrasion |
| UV |
| Fire Resistance |
| Hydrocarbons |
Permobond® RS-0555 Black Lead Cure Neoprene® (CR) Rubber a high polymer
content Lead Cure Neoprene. Engineered with enhanced cut & chip abrasion resistance specifically
designed for the Oilsands environment. The high polymer content increases the wear resistance and
permeability while maintaining the excellent organics resistance.
| Typical Uses |
| Piping |
| Vessels |
| Various Equipment |
- Hardness:
50 – 60 Shore A Durometer
- Tensile:
3000 psi min.
- Elongation:
695% min.
- Tear:
260 Lb/Lin. In.
- Service Temperature:
212°F max.(100°C)
| Strengths |
| Abrasion |
| UV |
| Fire Resistance |
| Hydrocarbons |
Permobond® RS-9005 (CR - Neoprene) imparts better flame resistance, weather ability, and ozone resistance experienced with diene rubbers. The swelling resistance of the 9005 to mineral,
vegetable, and animal oils is also better than the non polar diene-based rubbers. It has good resistance to paraffinic and naphthenic oils of high molecular weight.
| Typical Uses |
| Piping |
| Vessels |
| Various Equipment |
- Hardness:
45 - 55 Shore A Durometer
- Tensile:
3000 psi min.
- Elongation:
695% min.
- Tear:
260 Lb/Lin. In.
- Service Temperature:
220°F max.(104.44°C)
| Strengths |
| UV |
| Fire Resistance |
| Hydrocarbons |
RS-CR65 is based on CR (Polychloroprene, also known as Neoprene) synthetic rubber, giving it excellent suitability for applications requiring resistance to chemicals such as
acids, alkalis and certain organic fluids. It also has good heat resistance, with a continuous operating temperature of up to 120 degrees Centigrade being permissible.
| Typical Uses |
| Equipment |
| Vessels |
- Hardness:
60 – 70 Shore A Durometer
- Tensile:
1422 psi min.(100kg/cm²)
- Elongation:
400% min.
- Tear:
250 Lb/Lin. In.
- Service Temperature:
248°F max. (120°C)
| Strengths |
| Abrasion resistance |
| Chemical resistance |
| Hydrocarbons |
Permobond® RS-2275 Nitrile Rubber is a proprietary Nitrile/Natural rubber blend
(MOR - Moderate Oil Resistance). The is a polar-type lining used where there may be exposure to
aliphatic hydrocarbons in a service condition. With the blend of Natural Rubber has excellent physical
properties, such as tensile strength, abrasion resistance, and elongation. RS-2275 is flexible and will
expand and contract with thermal variations of the metal substrate. Comes with a bonding layer for
added adhesion.
| Typical Uses |
| Piping |
| Vessels |
| Various equipment |
- Hardness:
55 – 65 Shore A Durometer
- Tensile:
3200 psi min.
- Elongation:
550% min.
- Tear:
450 Lb/Lin. In.
- Service Temperature:
170°F max. (76.66°C)
| Strengths |
| Hydrocarbons |
| Abrasion |
Permobond® RS-2245 is a proprietary Nitrile/Natural rubber blend
(MOR - Moderate Oil Resistance). The is a polar-type lining used where there may be exposure to
aliphatic hydrocarbons in a service condition. With the blend of Natural Rubber has excellent physical
properties, such as tensile strength, abrasion resistance, and elongation. RS-2245 is flexible and will
expand and contract with thermal variations of the metal substrate.
| Typical Uses |
| Piping |
| Vessels |
| Various equipment |
- Hardness:
40 - 50 Shore A Durometer
- Tensile:
3200 psi min.
- Elongation:
550% min.
- Tear:
500 Lb/Lin. In.
- Service Temperature:
180°F max.(82.22°C)
| Strengths |
| Hydrocarbons |
| Abrasion |
Permobond® RS-5549 is an SBR compound that has great moulding characteristics with good balance of physical properties for exceptionally high abrasion resistance.
| Typical Uses |
| Moulding |
| Hose |
- Hardness:
55 – 65 Shore A Durometer
- Tensile:
3000 psi min.
- Elongation:
550% min.
- Tear:
325 Lb/Lin. In.
- Service Temperature:
180°F max.
Permobond® RS-5560 is an SBR compound that has great moulding characteristics with good balance of physical properties for exceptionally high abrasion resistance.
| Typical Uses |
| Moulding |
| Hose |
- Hardness:
50 – 60 Shore A Durometer
- Tensile:
1400 psi min.
- Elongation:
400% min.
- Tear:
-
- Service Temperature:
180°F max.
Permobond® RS-5375 Hard Graphite Re-enforced Natural Rubber is designed
for excellent resistance to a wide range of solutions including resistance to wet or dry chlorine
gas. FDA compliant as per 21CFR177.2600.
| Typical Uses |
| Storage Vessels |
| Over the road trailers |
- Hardness:
40 – 50 Shore D Durometer
- Tensile:
2000 psi min.
- Elongation:
100% min.
- Tear:
450 Lb/Lin. In.
- Service Temperature:
200°F max. (93.3°C)
| Strengths |
| Good resistance to chemicals |
Permobond® RS-5661 is a General Purpose Flexible Semi Hard Natural Rubber Lining that is designed for excellent resistance to a wide range of solutions.
| Typical Uses |
| Storage Vessels |
- Hardness:
85 – 95 Shore A Durometer
- Tensile:
2000 psi min.
- Elongation:
100% min.
- Tear:
450 Lb/Lin. In.
- Service Temperature:
200°F max.
| Strengths |
| Resistance to a variety of acids |
| Mild hydrocarbons |
Permobond® RS-5995 White Hard Natural Rubber is designed for excellent
resistance to a wide range of solutions. FDA compliant as per 21CFR177.2600.
| Typical Uses |
| Storage Vessels |
- Hardness:
30 – 40 Shore D Durometer
- Tensile:
2000 psi min.
- Elongation:
8% min.
- Tear:
450 Lb/Lin. In.
- Service Temperature:
180°F max. (82.2°C)
| Strengths |
| Various acids & chemicals |
RS-V55 Pre Cured Black Viton® Black Viton® sheet provides excellent resistance to
heat, oil and chemicals. These properties make Viton® sheet well suited for hot grease, engine and
compressor type applications. In addition this fluoroelastomer sheet is resistant to a wide range of
concentrated acids.
| Typical Uses |
| Expansion Joints |
| High Heat Applications |
| Gaskets and Seals |
- Hardness:
65 - 75 Shore A Durometer
- Tensile:
711 psi min. (160 kg/cm²)
- Elongation:
200% min.
- Tear:
.
- Service Temperature:
482°F max. (250°C)
| Strengths |
| Acid Resistance |
| Salt Solutions |
| Oils |
